Skip to content
For businesses →HelpLog in
A good place to start

Shower Regrouting

New grout fixes grout, it does not fix a leak. If joints are cracked, stained or falling out and nothing is wet on the other side of the wall, a tiler can regrout the shower. If water shows up in the next room or below, get the leak found first, or you pay twice.

Illustration of a tiler renewing the visible grout joints on a tiled shower wall.

Water in another room or below? Get the leak found before any grout work.

Local businesses

Choose your job suburb to see local businesses.

    Not Yamate affiliated.

    Start with your job

    Describe the grout job without guessing at a leak

    A tiler can confirm the surface scope. Escaping water needs its own investigation first.

    01

    Worn joints

    Show which grout lines are missing, cracked or permanently stained.

    Describe your job
    02

    Loose tiles or movement

    Ask the tiler to check the movement underneath before the joints are refilled.

    Describe your job
    03

    Water outside the shower

    Use the leaking shower repair guide first and share any finding with the tiler.

    Describe your job

    What a regrout quote should cover

    How many square metres of wall and floor, raking out the old grout, the new grout and its colour, protecting the tiles and tapware, and how long before the shower can be used again. If tiles are loose or sound drummy when tapped the job changes, so say so up front.

    And grout is not the waterproofing. The waterproofing is a separate layer behind the tiles that the National Construction Code requires in every shower, new grout just sits on top of it.

    The Yamate directory lists 2,644 tiling businesses across Australia, 1,057 in NSW, 741 in VIC, 353 in QLD. 2,436 of them publish their opening hours. In Queensland, 46 are matched to a licence record on the QBCC register, the one state register the directory reads so far. Counted 1 October 2026.

    Shower resealing is a different job

    The flexible silicone along the corners, the screen and the edges is sealant, not grout. And sealant is often the part that has actually failed, it peels and goes mouldy years before grout does. Resealing those joints is quicker and usually cheaper than a regrout, so ask which one your shower actually needs before booking either.

    Regrouting tiled floors and walls outside the shower

    Same work, different room. On floors, ask the tiler to walk the area and tap for drummy tiles first. Cracked grout that keeps coming back usually means the tiles are moving underneath, and filling the joints again does not stop that.

    Water on the other side of the wall

    If the next room or the ceiling below is wet, stop, grout will not fix it. Get the leak found first. The leaking shower repair guide covers who to call and in what order.

    The rules behind this page

    Licence rules change with the state and the job value. These come from the Yamate compliance guide, read at each regulator on the date shown.

    Wall & floor tiling licence (over state threshold)

    Read it at the regulator · checked 2026-11-11

    Waterproofing licence (NSW, over $5,000)

    Read it at the regulator · checked 2026-11-11

    Good questions. Plain answers.

    Will new grout or silicone fix a leaking shower?

    Not if water is getting past the waterproofing or a pipe. New grout and sealant tidy the surface, a leak needs its source found first.

    How long before I can use the shower again?

    Depends on the product, most grouts want 24 to 72 hours to cure. The cure time belongs in the written quote, ask for it there.

    Can a tiler quote from photos?

    For a straightforward regrout, usually yes. Loose tiles or movement need eyes on the wall before the price is final.

    Your next step

    Let’s get your job moving.

    Describe what you need, then choose who to contact.

    Find help with your job